Last updated: · By Laura Bennett
Smart appliances can help you lower utility bills in two ways: efficient models use less energy, and some let you run appliances at times when electricity costs less. For most homes, heating and cooling matter most, so a smart thermostat is usually the best first upgrade. This guide explains what the evidence supports, where the savings are modest, and how to decide what to buy.
Key Takeaways
- Heating and cooling use more energy than any other household system, which makes a smart thermostat the most logical starting point for cutting bills.
- ENERGY STAR estimates that certified smart thermostats save about 8% of heating and cooling bills, or roughly $50 per year on average.
- Appliances account for nearly 20% of the energy used in a home, according to the U.S. Department of Energy as summarized by Ohio State University.
- Connected ENERGY STAR washers, dryers, dishwashers, and refrigerators can be scheduled for times when electricity rates are lowest, but only if your utility uses time-of-use pricing.
- Actual savings depend on your climate, occupancy, and equipment, so compare your own bills over several months to measure results.
What Is a Smart Appliance and How Does It Save Money?
A smart appliance is a device that connects to your home network so you can monitor, schedule, or adjust it, often through a smartphone app. These features save money only when they change how much energy the appliance uses or when it uses it. Efficiency comes from the appliance’s design, while scheduling comes from running it at cheaper times.
ENERGY STAR reports that connected ENERGY STAR refrigerators, dishwashers, clothes washers, dryers, and room air conditioners use less energy, and their smart features can add further savings. Users can also schedule laundry or dishwashing for times when electricity rates are lowest. You can review the agency’s overview in ENERGY STAR guidance on smart appliances.
Scheduling only pays off if your utility charges different rates at different times of day. Check your bill or your utility’s website for time-of-use pricing before you rely on this feature.
Where Does Your Home’s Energy Go?
Appliances account for nearly 20% of the energy used in a home, according to the U.S. Department of Energy as summarized by the Ohio State University Office of Energy and Sustainability. Knowing which appliances use the most energy helps you decide where an upgrade will matter most. The university page points readers to DOE’s Appliance Energy Calculator for finding the biggest energy users.
Heating and cooling are usually the largest category. ENERGY STAR notes that heating and cooling use more energy than any other household system, which is why smart thermostats are the logical first step. The agency’s smart home energy tips explain how these controls fit into a broader plan.
How Much Can a Smart Thermostat Save?
ENERGY STAR estimates that certified smart thermostats save about 8% of heating and cooling bills, or roughly $50 per year on average. That is a modest figure, and your results will depend on your climate, how many people live in the home, and your heating and cooling equipment. The agency’s FAQ on connected thermostat criteria gives the full explanation.

Some older articles cite savings of $131 to $145 per year from smart thermostats. The sources reviewed for this guide do not support those amounts, so plan your budget around the ENERGY STAR estimate instead.
Setting schedules is where most of the savings come from. Lowering heating or raising cooling by a few degrees while you sleep or are away can reduce runtime, as long as the temperature stays safe for everyone in the home (see the safety section below).
What Affects Your Thermostat Savings?
- Climate: Homes in very hot or very cold regions have a larger heating and cooling load to reduce.
- Occupancy: Schedules that adjust temperature when no one is home give the thermostat more to work with.
- Equipment: Older furnaces and air conditioners may respond differently to smart controls, so confirm compatibility before buying.
Which Smart Appliances Are Worth Buying First?
Start with the energy use that costs you the most and the equipment you would need to replace anyway. For most households, that means a smart thermostat first, then ENERGY STAR connected appliances when an existing unit fails. The table below compares what the sources support for each option.

| Smart appliance | Main money-saving feature | What the sources show |
|---|---|---|
| Smart thermostat | Adjusts heating and cooling to your schedule and occupancy | About 8% of heating and cooling bills, or roughly $50 per year on average (ENERGY STAR) |
| Connected ENERGY STAR clothes washer or dryer | Runs cycles when electricity rates are lowest | Uses less energy than standard models; no dollar savings figure in the sources |
| Connected ENERGY STAR dishwasher | Scheduled cycles at lower-rate times | Uses less energy than standard models; savings depend on time-of-use rates |
| Connected ENERGY STAR refrigerator | Efficient cooling and smart features that add savings | Uses less energy than standard models; no dollar savings figure in the sources |
| Connected ENERGY STAR room air conditioner | Scheduling and remote control | Uses less energy than standard models; savings depend on use and climate |
How Do You Start Saving With Smart Appliances?
Begin with your bills rather than a shopping list. Following these steps in order helps you find the upgrades that fit your home and budget.
- Review your last 12 months of bills. Note your highest-cost months and whether heating or cooling drives them.
- Check for time-of-use rates. Scheduling laundry or dishwashing only helps if electricity costs more at some hours than others.
- Add a smart thermostat if you do not have one. It addresses the largest energy category in most homes.
- Schedule flexible appliances. Run washers, dryers, and dishwashers during your utility’s lowest-rate hours when the schedule fits your household.
- Choose ENERGY STAR models when replacing equipment. Compare the purchase price with expected savings before buying.
- Measure the results. Compare bills for the same months across years, keeping in mind that weather changes usage.
How Do You Fit Smart Appliance Upgrades Into Your Budget?
Divide the upfront cost of a device by its expected yearly savings to estimate its payback period. For example, a hypothetical $300 device that saves $50 per year would take six years to pay for itself. Shorter payback periods are better, and upgrades you need to make anyway usually make the most sense.
Add the purchase to your monthly plan so it does not crowd out essential bills. A 50/30/20 budget calculator for planning monthly household spending can help you see how much room you have for a purchase.
Are There Rebates for Smart Appliances?
Many utilities and state programs offer rebates for efficient appliances, and some federal tax credits apply to certain home improvements. Amounts, eligibility, and deadlines change, so verify each program directly before you buy. Your utility’s website and your state energy office are good places to start.
Can Energy Monitors and Smart Plugs Lower Your Bill?
Energy monitors and smart plugs can show you which devices use the most power, but they do not save money on their own. Savings come from the changes you make after you review the data. Standby power, the electricity devices draw while switched off or idle, is one area where smart plugs or power strips can reduce waste.
How Do You Use Monitoring Data Well?
- Track one month of usage for your highest-cost appliances before changing anything.
- Turn off or unplug idle electronics, or use a power strip that cuts power to them.
- Test one change at a time, such as a lower thermostat setting when you are away, and compare the results.
Are There Safety or Health Limits to Automating Appliances?
Yes. Automation should never interrupt equipment that a person’s health depends on. If anyone in your home uses powered medical equipment, such as an oxygen concentrator or CPAP machine, talk with the prescribing clinician or equipment supplier before adding timers, smart plugs, or power-saving schedules to that circuit.
Temperature settings also matter for people who are more vulnerable to heat or cold, including infants, older adults, and people with chronic illnesses. Savings should never come at the cost of unsafe indoor temperatures. Ask your doctor what range is appropriate for your household before setting back a thermostat significantly.
Smart devices also depend on Wi-Fi and apps. Keep a manual way to control heating, cooling, and water heating in case the network or app fails.
Frequently Asked Questions
Do Smart Thermostats Really Lower Utility Bills?
They can. ENERGY STAR estimates that certified models save about 8% of heating and cooling bills, or roughly $50 per year on average. Results vary with climate, household schedule, and equipment, so track your own bills to see your result.
Are Smart Appliances Worth It for Renters?
Plug-in devices such as smart plugs and power strips are often the simplest option for renters. Check your lease and ask your landlord before replacing built-in equipment or installing a thermostat, since many leases limit changes. Keep any device you install so you can remove it when you move.
Does Scheduling Laundry Actually Save Money?
It can, but only if your utility uses time-of-use pricing with lower rates at certain hours. ENERGY STAR notes that connected appliances let you schedule laundry or dishwashing for times when electricity rates are lowest. If your electricity rate is flat, scheduling will not reduce your cost per load.
Is a Whole-Home Energy Monitor Worth the Cost?
It depends on whether you will act on the data. A monitor shows which devices use the most power, but it does not reduce your bill by itself. Compare its price with the specific changes you expect to make, such as adjusting schedules or replacing a costly appliance.
What Is ENERGY STAR and Why Does It Matter?
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy that certifies products meeting energy efficiency criteria. Looking for the label helps you identify models that use less energy than standard versions. Certification does not guarantee a specific dollar savings, so check the details for each product.
Conclusion
Smart appliances can help you lower utility bills, but the gains are usually modest and depend on your home. Start with heating and cooling, choose ENERGY STAR models when you replace equipment, and use scheduling only where time-of-use rates apply. Measure your bills over several months, and treat any health-related equipment as a separate case that needs professional advice.
More on Lower Utility Bills
- Low Flow Shower Heads by Bricor: Are They Worth the Savings?
- When It Rains, It Pours: Window Open When It Rains But It’s Too Hot?
Related guides: How to Watch TV Without Cable: The Ultimate Guide · Affordable and Effective Cleaning Products for Frugal Living · DIY Home Repairs on a Budget: Affordable Fixes for Common Problems
Free tools: 50/30/20 Budget Calculator
This article is general information, not financial advice. Prices and deals change: check current terms before you buy. Read our financial disclaimer and editorial policy.


